en
ru
es
it
fr
de
pt

Teardown difficulty:
Hard

Recommended tools

Apple iPhone 6 Teardown

Step 1

Using the key tool, open the SIM card slot and remove it.

Warning!

Do not push too hard this may cause damage.

Step 2

Using a screwdriver (Star Shape 0.8mm Pentalobe), unscrew the 2 bolts on the end of the phone.

Step 3

Lift the display.

Step 4

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket holds the connectors.

Step 5

Disconnect the battery connector.

Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

Step 6

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 5 bolts and remove the bracket holds the connectors.

Step 7

Disconnect the connectors on the printed circuit board and remove the display.

Step 8

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the vibromotor.

Step 9

Disconnect connectors on the PCB.

Step 10

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the part with speaker (buzzer).

Step 11

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket holds the lightning / charging port.

Step 12

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts.

Step 13

Disconnect the flexible flat cable with a microphone, lightning/charging port, and headset connector.

Step 14

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket holds the connectors.

Step 15

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 5 bolts and remove the bracket.

Step 16

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket.

Step 17

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket holds the camera.

Step 18

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the NFC antenna.

Step 19

Disconnect connector on the PCB and remove the main camera.

Step 20

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket.

Step 21

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the PCB.

Step 22

Disconnect connectors on the PCB.

Step 23

Remove the PCB.

Step 24

Parts in the back cover (housing).

Disassembly Video


Ask a question