en
ru
es
it
fr
de
pt

Teardown difficulty:
Easy

Recommended tools

BlackBerry KEYone Teardown

BlackBerry KEYone, Step 1/1 BlackBerry KEYone, Step 1/2
Step 1

Using the key tool, open the SIM card slot and remove it.

Warning!

Do not push too hard this may cause damage.

BlackBerry KEYone, Step 2/1 BlackBerry KEYone, Step 2/2
Step 2

Open the cap hiding the bolts at the upper part. 

Warning!

For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.

BlackBerry KEYone, Step 3/1 BlackBerry KEYone, Step 3/2
Step 3

Using a screwdriver (Phillips 1.5 mm cross-head), unscrew the 2 bolts securing the back cover.

BlackBerry KEYone, Step 4/1 BlackBerry KEYone, Step 4/2
Step 4

Pry and remove the cover at the upper part.

BlackBerry KEYone, Step 5/1 BlackBerry KEYone, Step 5/2
Step 5

Open the back cover.

BlackBerry KEYone, Step 6/1 BlackBerry KEYone, Step 6/2
Step 6

Using a screwdriver (Phillips 1.5 mm cross-head), unscrew the 2 bolts securing the battery connector and disconnect the connector.

Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

BlackBerry KEYone, Step 7/1 BlackBerry KEYone, Step 7/2
Step 7

Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 7 bolts in the lower PCB.

BlackBerry KEYone, Step 8/1 BlackBerry KEYone, Step 8/2
Step 8

Pry and remove the protective panel at the bottom part.

BlackBerry KEYone, Step 9/1 BlackBerry KEYone, Step 9/2
Step 9

Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 3 bolts at the upper part.

BlackBerry KEYone, Step 10/1 BlackBerry KEYone, Step 10/2
Step 10

Pry and remove the protective panel at the upper part.

BlackBerry KEYone, Step 11/1 BlackBerry KEYone, Step 11/2
Step 11

Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 5 bolts in the PCB.

BlackBerry KEYone, Step 12/1 BlackBerry KEYone, Step 12/2
Step 12

Remove the panel covering the connectors.

BlackBerry KEYone, Step 13/1 BlackBerry KEYone, Step 13/2
Step 13

Disconnect the connectors on the PCB.

BlackBerry KEYone, Step 14/1 BlackBerry KEYone, Step 14/2
Step 14

Remove the PCB.

BlackBerry KEYone, Step 15/1 BlackBerry KEYone, Step 15/2 BlackBerry KEYone, Step 15/3
Step 15

Parts in the frame of the display module.

Disassembly Video


Ask a question