Open the back cover.
Lift and remove the battery.
Using a screwdriver (hex T6), unscrew 8 bolts in the frame of the phone.
Pry and remove the middle cover.
Disconnect connector on the PCB and remove the main camera.
Disconnect connectors on the PCB.
Remove the PCB.
Using a screwdriver (hex T2), unscrew the 3 bolts in the display frame
Remove the flexible flat cable of the volume and power buttons.
Remove the flexible flat cable with the headphone jack/socket and earpiece speaker.
Remove the PCB with vibrator motor.
Parts in the frame of the display module.