Open the back cover.
Lift and remove the battery.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 8 bolts in the frame of the phone.
Pry and remove the middle frame and the keys of the volume and power buttons.
Disconnect the coaxial cable connectors and remove the cable.
Disconnect connectors on the lower PCB and remove it.
Disconnect connector on the PCB and pry up the ffc cable with power & volume buttons.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts in the PCB.
Remove the PCB.
Parts in the frame of the display module.