Open the back cover.
Lift and remove the battery.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts & using a screwdriver (hex T5), unscrew the 4 bolts in the frame of the phone.
Pry and remove the middle frame.
Disconnect connector on the PCB and remove the main camera.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the PCB.
isconnect connectors on the PCB and pry up vibration motor.
Turn over PCB, disconnect the connector of the coaxial cable from the inside and remove the board.
Parts in the frame of the display module.