Open the back cover.
Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 15 bolts in the frame of the phone.
Pry and remove the middle frame.
Disconnect the battery connector.
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Disconnect the connectors on the lower PCB.
Remove the lower PCB.
Disconnect the connector on PCB and remove the main camera.
Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 2 bolts in the PCB.
Disconnect the connectors on the PCB.
Remove the PCB.
Parts in the frame of the display module.