Open the back cover.
Lift and remove the battery.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and using a screwdriver (hex T5), unscrew 8 bolts in the frame of the phone.
Pry and remove the middle frame.
The middle frame.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the main PCB & 1 bolt in the lower board.
Disconnect connectors on the lower PCB and remove it.
Disconnect connectors on the PCB.
Peel back the protective copper layer
Overturn the board, disconnect the connectors from the inside and remove it.
Parts in the frame of the display module.