Open the back cover.
Lift and remove the battery.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 17 bolts in the frame of the phone.
Pry and remove the middle frame.
The middle frame.
Disconnect connector on the PCB and remove the main camera.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts in the PCB.
Disconnect connectors on the PCB and pry up vibration motor.
Remove the PCB.
Pry and remove the earpiece (speaker).
Parts in the frame of the display module.