Open the back cover.
Disconnect the battery connector.
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 6 bolts in the lower part.
Pry and remove the buzzer (speaker) assembly.
Disconnect connectors on the lower PCB.
Remove the lower PCB.
Disconnect the connector and remove the inter-board cable.
Disconnect connectors on the PCB and remove the main and front (selfie) cameras.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the PCB.
Remove the PCB.
Parts are in the frame of the display module.