en
ru
es
it
fr
de
pt

Teardown difficulty:
Easy

Recommended tools

Lenovo ZUK Z2 Teardown

Step 1

Open the back cover.

Warning!

For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.

Step 2

Using the key tool, open the SIM card tray and remove it.

Warning!

Do not push too hard this may cause damage.

Step 3

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the bracket holds the connector.

Step 4

Disconnect the battery connector.

Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

Step 5

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 8 bolts in the lower part.

Step 6

Pry and remove the buzzer (speaker) assembly.

Step 7

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts in the upper part.

Step 8

Remove the upper cover.

Step 9

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the PCB.

Step 10

Disconnect connector on the PCB and remove the front (selfie) camera.

Step 11

Disconnect connectors on the PCB.

Step 12

Remove the PCB.

Step 13

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts securing the power & volume buttons flex cable.

Step 14

Pry & remove the power & volume buttons flex cable.

Step 15

Pry and remove the flat cable with the headphone jack/socket & vibration motor & microphone.

Step 16

Parts are in the frame of the display module.

Disassembly Video