Open the back cover.
Lift and remove the battery.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 12 bolts in the frame of the phone.
Pry and remove the middle frame.
Pemove the cover.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the PCB.
Disconnect the connector on PCB, and remove the front (selfie) camera.
Disconnect connectors on the PCB.
Remove the PCB.
Pry and remove the vibration motor.
Pry & remove the headphone jack/socket.
Parts are in the frame of the display module.