Open the back cover.
Lift and remove the battery.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 9 bolts in the frame of the phone.
Pry and remove the middle frame.
For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
Pry and remove the buzzer (speaker).
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the PCB.
Disconnect the connector on PCB, and remove the front (selfie) camera.
Disconnect connectors on the PCB.
Remove the PCB.
Pry & remove the vibration motor.
Pry and remove the cable with a earpiece (speaker) and headphone jack/socket.
Parts are in the frame of the display module.