Open the back cover.
Lift and remove the battery.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 14 bolts in the frame of the phone.
Pry and remove the middle frame.
The middle frame with a buzzer (speaker).
Pry up the inter-board cable and coaxial cable connectors and remove the lower PCB.
Pry up the connector on PCB and remove the headphone jack/socket.
Disconnect connectors on the PCB.
Remove the PCB.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the bracket, front (selfie) camera and proximity sensor.
Parts are in the frame of the display module.