Open the back cover.
Lift and remove the battery. Pull out the stylus pen.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 13 bolts in the frame of the phone.
Pry and remove the middle frame.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt securing the headphone jack/socket.
Disconnect connectors on the main PCB.
Remove the PCB.
Pry up the connector and remove the coaxial cable.
Pry and remove the vibration motor.
Remove the bracket.
Pry and remove the cable with ear piece speaker and headphone jack/socket and proximity sensor.
Remove the charging port bracket.
Remove the lower PCB.
Parts are in the frame of the display module.