Open the back cover. Pull out the stylus pen.
Lift and remove the battery.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 12 bolts in the frame of the phone.
Pry and remove the middle frame.
The middle frame.
Pry up the connectors and remove the coaxial cable.
Pry up the inter-board cable connector and remove the lower PCB.
Disconnect the connector on PCB, and remove the front (selfie) camera.
Disconnect connectors on the PCB.
Remove the PCB.
Pry and remove the vibration motor.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt. Pry and remove the cable with a earpiece (speaker) and headphone jack/socket.
Parts are in the frame of the display module.