Open the back cover. Also, pull out the stylus pen
Lift and remove the battery.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 15 bolts in the frame of the phone.
Pry and remove the middle frame.
Disconnect the connector on PCB, and remove the front (selfie) camera.
Disconnect connectors on the PCB.
Lift up the main PCB, disconnect the inter-board connector from the inside and remove it.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the lower PCB.
Remove the lower PCB.
Pry up the connector on PCB and remove the headphone jack/socket and vibration motor.
Pry and remove the earpiece (speaker) and proximity sensor.
Parts are in the frame of the display module.