Open the back cover.
Lift and remove the battery.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 12 bolts in the frame of the phone.
Pry and remove the middle frame.
Pry up the connector and remove the small board with Sim holder and volume buttons cable.
Disconnect connectors on the PCB.
Remove the PCB.
Remove the lower board with charging port.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the bracket.
Pry & remove the headphone jack/socket and front (selfie) camera.
Pry and remove cable with earpiece (speaker) and proximity sensor.
Parts are in the frame of the display module.