Open the back cover.
Lift and remove the battery.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 9 bolts in the frame of the phone.
Pry and remove the middle frame.
Disconnect connectors on PCB and remove the bracket, front (selfie) camera and proximity sensor.
Remove the bracket holding the charging port.
Disconnect connectors on both PCBs and remove it.
Disconnect connectors on the PCB and remove it.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the headphone jack/socket
Parts are in the frame of the display module.