Open the back cover.
Disconnect the battery connector.
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Disconnect connectors and remove the inter-board cable.
Disconnect the connector and remove the cable with a microphone.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 bolts in the PCB.
Disconnect the connector on PCB, and remove the front (selfie) camera.
Disconnect connectors on the PCB.
Remove the PCB.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket.
Pry and remove the headphone jack/socket.
Parts are in the frame of the display module.