Open the back cover.
Lift and remove the battery.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 10 bolts in the frame of the phone.
Pry and remove the middle frame.
Remove the bracket holding the front (selfie) camera and proximity sensor.
Pry up connectors and remove the front (selfie) camera and cable with a proximity sensor and earpiece speaker.
Disconnect connectors on the PCB.
Lift up the board, disconnect the connector from the inside and remove it.
Disconnect the connector on the lower PCB and remove it.
Remove the cable with SIM and Micro SD card holders.
Pry and remove the headphone jack/socket and vibration motor.
Parts are in the frame of the display module.