Using the key tool, open the SIM cards tray and remove it.
Open the back cover.
For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
Disconnect the battery connector.
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 bolts.
Pry and remove the buzzer (speaker) assembly.
Lift and remove the battery.
Disconnect connectors on the lower PCB.
Remove the lower PCB.
Remove the upper cover.
Disconnect the connector on PCB, and remove the main camera.
Disconnect connectors on the PCB.
Remove the PCB.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the headphone jack/socket.
Pry and remove the earpiece (speaker).
Parts are in the frame of the display module.