Using the key tool, open the SIM cards tray and remove it.
Do not push too hard this may cause damage.
Open the back cover.
Pry up the fingerprint sensor connector and remove the cover,
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 bolts and remove the bracket holding the connectors.
Disconnect the battery connector.
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 6 bolts.
Pry and remove the buzzer (speaker) assembly.
Remove the battery.
Disconnect connectors on the PCB.
Remove the PCB.
Remove the camera frame.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts.
Remove the cover with antennas.
Disconnect connectors on PCB and remove the main and front (selfie) cameras.
Parts are in the frame of the display module.