Using the key tool, open the SIM card slot and remove it.
⚠️ Warning!
Do not push too hard this may cause damage.
Author, currently - Quality Assurance Specialist
Using the key tool, open the SIM card slot and remove it.
⚠️ Warning!
Do not push too hard this may cause damage.
Using a screwdriver (Star Shape 0.8mm Pentalobe), unscrew the 2 bolts on the end of the phone.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket holds the connectors.
Disconnect the battery connector.
⚠️ Warning!
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 5 bolts and remove the bracket holds the connectors.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the part with speaker (buzzer).
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket holds the lightning / charging port.
Disconnect the flexible flat cable with a microphone, lightning/charging port, and headset connector.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket holds the connectors.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket holds the camera.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.