menu
search
live_help face
en
English
Russian
Spanish
Portuguese
Infelizmente, o conteúdo para a língua escolhida ainda não está preenchido
Hey there!

We find that the language of the content is different from the language of your location.

You can change the language in the upper right corner or stay with the current language

DEXP Ursus Z110
DEXP Ursus Z110
Teardown difficulty:
Easy
Duration:
14 min

Recommended tools

Soldering Iron Soldering iron
Screwdriver Phillips #000 Screwdriver phillips #000
Opening tool / Spudger Opening tool / spudger
Tweezers Tweezers

Disassembly/Repair of the mobile device DEXP Ursus Z110 (DEXP Ursus Z110/Z110i Apollo) with each step description and the required set of tools.

Vadim Popoff

Author, currently - Quality Assurance Specialist

How to disassemble DEXP Ursus Z110, Step 1/1 How to disassemble DEXP Ursus Z110, Step 1/2

Step 1.

Open the back cover and turn it over.

How to disassemble DEXP Ursus Z110, Step 2/1 How to disassemble DEXP Ursus Z110, Step 2/2

Step 2.

Pry up the connector and remove the cover.

How to disassemble DEXP Ursus Z110, Step 3/1 How to disassemble DEXP Ursus Z110, Step 3/2

Step 3.

Disconnect the battery connector.

⚠️ Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

How to disassemble DEXP Ursus Z110, Step 4/1 How to disassemble DEXP Ursus Z110, Step 4/2

Step 4.

Peel back the protective layer.

How to disassemble DEXP Ursus Z110, Step 5/1 How to disassemble DEXP Ursus Z110, Step 5/2

Step 5.

Disconnect the connector on PCB, and remove the main camera.

How to disassemble DEXP Ursus Z110, Step 6/1 How to disassemble DEXP Ursus Z110, Step 6/2

Step 6.

Pry up the coaxial cables connectors.

How to disassemble DEXP Ursus Z110, Step 7/1 How to disassemble DEXP Ursus Z110, Step 7/2

Step 7.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the small board.

How to disassemble DEXP Ursus Z110, Step 8/1 How to disassemble DEXP Ursus Z110, Step 8/2

Step 8.

Remove the small board.

How to disassemble DEXP Ursus Z110, Step 9/1 How to disassemble DEXP Ursus Z110, Step 9/2

Step 9.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts in the PCB.

How to disassemble DEXP Ursus Z110, Step 10/1 How to disassemble DEXP Ursus Z110, Step 10/2

Step 10.

Disconnect the connectors on PCB, and remove the (FFC) cable with front-selfie camera.

How to disassemble DEXP Ursus Z110, Step 11/1 How to disassemble DEXP Ursus Z110, Step 11/2

Step 11.

Disconnect connectors on the PCB.

How to disassemble DEXP Ursus Z110, Step 12/1 How to disassemble DEXP Ursus Z110, Step 12/2

Step 12.

Unsolder the microphone contacts.

How to disassemble DEXP Ursus Z110, Step 13/1 How to disassemble DEXP Ursus Z110, Step 13/2

Step 13.

Unsolder vibration motor and loud speaker contacts. 

How to disassemble DEXP Ursus Z110, Step 14/1 How to disassemble DEXP Ursus Z110, Step 14/2 How to disassemble DEXP Ursus Z110, Step 14/3

Step 14.

Parts are in the frame of the display module.

Detailed disassembly instructions of DEXP Ursus Z110 in the video, made by our mobile repair & service center:

If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.

#instructions #DEXP #DEXP Ursus Z110
Evgenii Kuzmin

Evgenii Kuzmin

Senior maintenance service and repair engineer

Disassembling\Repair has easy complexity and takes about 14 minutes in time.
Our manual is suitable for all models DEXP Ursus Z110 — DEXP Ursus Z110/Z110i Apollo released for markets in different countries.


Back to the list
arrow_upward
arrow_upwardarrow_downward
arrow_forwardarrow_back