Using the key tool, open the SIM card and MMC card tray and remove it.
⚠️ Warning!
Do not push too hard this may cause damage.
To ask the question please sign in with one of your existing third party accounts.
To get notifications please sign in with one of your existing third party accounts.
Please sign in with one of your existing third party accounts.
We find that the language of the content is different from the language of your location.
You can change the language in the upper right corner or stay with the current language
Author / Content specialist with 10+ years of experience
Using the key tool, open the SIM card and MMC card tray and remove it.
⚠️ Warning!
Do not push too hard this may cause damage.
Open the back cover.
⚠️ Warning!
The fingerprint sensor (located on the cover) connects to the PCB by a cable, so you need to open carefully.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the bracket holds the connectors.
Disconnect the battery connector.
⚠️ Warning!
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
Disassembling\Repair has hard complexity and takes about 9 minutes in time.
Our manual is suitable for all models Huawei Ascend Mate 7 — Huawei Ascend Mate 7 MT7-TL09 MT7-TL10 released for markets in different countries.