menu
search
live_help face
en
English
Russian
Spanish
Portuguese
Infelizmente, o conteúdo para a língua escolhida ainda não está preenchido
Hey there!

We find that the language of the content is different from the language of your location.

You can change the language in the upper right corner or stay with the current language

OnePlus 3 A3003
OnePlus 3 A3003
Teardown difficulty:
Moderate
Duration:
8 min

Recommended tools

Screwdriver Torx Т2 Screwdriver torx т2
Screwdriver Phillips #000 Screwdriver phillips #000
Opening tool / Spudger Opening tool / spudger
Tweezers Tweezers

Disassembly/Repair of the mobile device OnePlus 3 A3003 (One Plus 3 A3003 / A3000) with each step description and the required set of tools.

Vadim Popoff

Author, currently - Quality Assurance Specialist

How to disassemble One Plus 3 A3003, Step 1/1 How to disassemble One Plus 3 A3003, Step 1/2

Step 1.

Using the key tool, open the SIM card tray and remove it.

⚠️ Warning!

Do not push too hard this may cause damage.

How to disassemble One Plus 3 A3003, Step 2/1 How to disassemble One Plus 3 A3003, Step 2/2

Step 2.

Using a screwdriver (hex T2), unscrew the 2 bolts on the end of the phone.

How to disassemble One Plus 3 A3003, Step 3/1 How to disassemble One Plus 3 A3003, Step 3/2

Step 3.

Open the back cover.

How to disassemble One Plus 3 A3003, Step 4/1 How to disassemble One Plus 3 A3003, Step 4/2 How to disassemble One Plus 3 A3003, Step 4/3

Step 4.

Disconnect the battery connector.

⚠️ Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

How to disassemble One Plus 3 A3003, Step 5/1 How to disassemble One Plus 3 A3003, Step 5/2

Step 5.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt and remove the bracket holds the connectors.

How to disassemble One Plus 3 A3003, Step 6/1 How to disassemble One Plus 3 A3003, Step 6/2 How to disassemble One Plus 3 A3003, Step 6/3

Step 6.

Disconnect connectors and remove the inter-board and coaxial cables.

How to disassemble One Plus 3 A3003, Step 7/1 How to disassemble One Plus 3 A3003, Step 7/2

Step 7.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts.

How to disassemble One Plus 3 A3003, Step 8/1 How to disassemble One Plus 3 A3003, Step 8/2 How to disassemble One Plus 3 A3003, Step 8/3 How to disassemble One Plus 3 A3003, Step 8/4

Step 8.

Disconnect connectors and remove the lower PCB with inter-board cable.

How to disassemble One Plus 3 A3003, Step 9/1 How to disassemble One Plus 3 A3003, Step 9/2

Step 9.

Lift and remove the battery.

How to disassemble One Plus 3 A3003, Step 10/1 How to disassemble One Plus 3 A3003, Step 10/2

Step 10.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 6 bolts in the PCB.

How to disassemble One Plus 3 A3003, Step 11/1 How to disassemble One Plus 3 A3003, Step 11/2 How to disassemble One Plus 3 A3003, Step 11/3

Step 11.

Disconnect connector on the PCB.

How to disassemble One Plus 3 A3003, Step 12/1 How to disassemble One Plus 3 A3003, Step 12/2

Step 12.

Remove the PCB.

How to disassemble One Plus 3 A3003, Step 13/1 How to disassemble One Plus 3 A3003, Step 13/2

Step 13.

Pry and remove the earpiece (speaker).

How to disassemble One Plus 3 A3003, Step 14/1 How to disassemble One Plus 3 A3003, Step 14/2 How to disassemble One Plus 3 A3003, Step 14/3

Step 14.

Parts are in the frame of the display module.

Detailed disassembly instructions of OnePlus 3 A3003 in the video, made by our mobile repair & service center:

If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.

#instructions #OnePlus #OnePlus 3 A3003
Evgenii Kuzmin

Evgenii Kuzmin

Senior maintenance service and repair engineer

Disassembling\Repair has medium complexity and takes about 8 minutes in time.
Our manual is suitable for all models OnePlus 3 A3003 — One Plus 3 A3003 / A3000 released for markets in different countries.


Back to the list
arrow_upward
˄˅
˃˂