Open the back cover.
Lift the battery out of the phone.
Using a screwdriver (hex T5), unscrew 9 bolts securing the frame to the back housing.
Pry the frame (use an opening tool) and put the plastic frame away.
Using a screwdriver (hex T5), unscrew 1 bolt in the PCB.
Disconnect the connectors and remove the lower part with the buzzer (speaker).
Disconnect the connectors on the PCB.
Remove the PCB.
We take out the main camera and the cable with the front (selfie) camera and proximity sensor.
Parts in the frame of the module.