en
ru
es
it
fr
de
pt

Teardown difficulty:
Easy

Recommended tools

Blackview P6000 Teardown

Blackview P6000, Step 1/1 Blackview P6000, Step 1/2
Step 1

Using the key tool, open the SIM card tray and remove it.

Warning!

Do not push too hard this may cause damage.

Blackview P6000, Step 2/1 Blackview P6000, Step 2/2
Step 2

Open the back cover.

Warning!

For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.

Blackview P6000, Step 3/1 Blackview P6000, Step 3/2
Step 3

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 15 bolts in the frame of the phone.

Blackview P6000, Step 4/1 Blackview P6000, Step 4/2
Step 4

Pry and remove the middle frame.

Blackview P6000, Step 5/1 Blackview P6000, Step 5/2
Step 5

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts and remove the bracket holds the connectors.

Blackview P6000, Step 6/1 Blackview P6000, Step 6/2
Step 6

Disconnect the battery connector.

Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

Blackview P6000, Step 7/1 Blackview P6000, Step 7/2
Step 7

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 6 bolts securing the battery.

Blackview P6000, Step 8/1 Blackview P6000, Step 8/2
Step 8

Lift and remove the battery.

Blackview P6000, Step 9/1 Blackview P6000, Step 9/2
Step 9

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the lower PCB.

Blackview P6000, Step 10/1 Blackview P6000, Step 10/2 Blackview P6000, Step 10/3
Step 10

Disconnect connectors on the lower PCB.

Blackview P6000, Step 11/1 Blackview P6000, Step 11/2
Step 11

Remove the lower board.

Blackview P6000, Step 12/1 Blackview P6000, Step 12/2
Step 12

Disconnect connectors on the PCB.

Blackview P6000, Step 13/1 Blackview P6000, Step 13/2
Step 13

Remove the PCB.

Blackview P6000, Step 14/1 Blackview P6000, Step 14/2 Blackview P6000, Step 14/3
Step 14

Parts are in the frame of the display module.

Disassembly Video


Ask a question