Open the back cover.

Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 15 bolts in the frame of the phone.

Remove the middle frame.

Disconnect the connector and remove the fingerprint scanner and disconnect the battery connector.

⚠ Warning!

We strongly recommend disconnecting the connector to avoid possible short circuit during disassembly.

Disconnect the connectors on the lower PCB.

Remove the lower PCB.

Using a screwdriver (Phillips 1.5 mm cross-head), unscrew the 4 bolts securing the battery.

Remove the battery.

Disconnect the connector on PCB and remove the main camera.

Using a screwdriver (Phillips 1.5 mm cross-head), unscrew 2 bolts in the PCB.

Disconnect the connectors on the PCB. 

⚠ Warning!

The connector of the coaxial cable is located on the inside of the board.

Remove the PCB.

Parts in the frame of the display module.