en
ru
es
it
fr
de
pt

Teardown difficulty:
Easy

Recommended tools

BQ-6001L JUMBO Teardown

Step 1

Open the back cover.

Warning!

For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.

Step 2

Open the back cover.

Step 3

Unsolder the battery wires.

Warning!

We strongly recommend unsoldering the wires to avoid a possible short circuit during disassembly.

Step 4

Disconnect the connector and remove the fingerprint sensor.

Step 5

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket holds the connector.

Step 6

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 6 bolts in the lower part.

Step 7

Pry and remove the cover.

Step 8

Disconnect connectors on the PCB.

Step 9

Remove the lower PCB.

Step 10

Disconnect connectors on the PCB. Remove the battery as well.

Step 11

Disconnect connector on the PCB and remove the main camera.

Step 12

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 6 bolts in the PCB.

Step 13

Remove the PCB.

Step 14

Parts are in the frame of the display module.

Disassembly Video


Ask a question