Open the back cover and turn it over.
Pry up the connector and remove the cover.
Disconnect the battery connector.
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Peel back the protective layer.
Disconnect the connector on PCB, and remove the main camera.
Pry up the coaxial cables connectors.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the small board.
Remove the small board.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts in the PCB.
Disconnect the connectors on PCB, and remove the (FFC) cable with front-selfie camera.
Disconnect connectors on the PCB.
Unsolder the microphone contacts.
Unsolder vibration motor and loud speaker contacts.
Parts are in the frame of the display module.