Open the back cover.
Lift and remove the battery.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 16 bolts in the frame of the phone.
Pry and remove the middle frame.
Peel back the protective layer.
For careful separation, we recommend using a heat gun. At the same time, it is necessary to heat carefully in order, not to damage the surface of the device.
Lift the cover up.
Unsolder the speaker wires located inside the cover and remove the cover.
Disconnect connector on the PCB and remove the main camera.
Disconnect connectors on the PCB.
Remove the PCB.
Parts are in the frame of the display module.