en
ru
es
it
fr
de
pt

Teardown difficulty:
Easy

Recommended tools

Doogee S60 IP68 Teardown

Step 1

Using a screwdriver (flat), unscrew the 2 bolts in the back cover. Open the cover hiding the holders of the SIM and MMC cards.

Step 2

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts.

Step 3

Using a screwdriver (hex T5), unscrew 6 bolts on the edges of the phone and remove the frames and button keys.

Step 4

Using a screwdriver (hex T5), unscrew 4 bolts in the back cover.

Step 5

Using a screwdriver (hex T5), unscrew 8 bolts in the back cover.

Step 6

Open the back cover.

Step 7

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket holds the connector.

Step 8

Pry up the fingerprint sensor connector.

Step 9

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 bolts in the lower PCB.

Step 10

Disconnect connectors on the lower PCB.

Step 11

Remove the lower PCB.

Step 12

Pry up the sensor.

Step 13

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 bolts.

Step 14

Disconnect connector on the PCB and remove the front (selfie) camera.

Step 15

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 bolts in the PCB.

Step 16

Overturn the board, disconnect the connectors from the inside.

Step 17

Remove the PCB.

Step 18

Unstick and remove the battery.

Step 19

Parts are in the frame of the display module.

Disassembly Video