Open the back cover.
Lift and remove the battery.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 8 bolts in the frame of the phone.
Pry and remove the middle frame.
The middle frame with the buzzer (speaker).
Disconnect connector on the PCB and remove the main camera.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts in the PCB.
Disconnect the connectors on the PCB and remove FFC of the volume and power buttons, the vibrator motor and the microphone.
Remove the PCB.
Parts in the frame of the display module.