Open the back cover.
Lift and remove the battery.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 12 bolts in the frame of the phone.
Pry and remove the middle frame.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts in the PCB.
Disconnect connector on the PCB and remove the front (selfie) camera.
Disconnect connectors on the PCB.
Overturn the board, disconnect the coaxial cable connector and remove it.
Pry and remove the earpiece (speaker).
Parts in the frame of the display module.