Open the back cover.
Lift and remove the battery.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 8 bolts in the frame of the phone.
Pry and remove the middle frame.
The middle frame.
Disconnect connector on the PCB and remove the main camera.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the PCB.
Disconnect connectors on the PCB.
Overturn the board, disconnect the connectors from the inside and remove it.
Remove the lower PCB and coaxial cable.
Parts in the frame of the display module.