Open the back cover.
Lift and remove the battery.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 6 bolts in the frame of the phone.
Pry and remove the middle frame.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the main PCB &1 bolt in the lower board.
Disconnect connectors on the lower PCB and remove it.
Disconnect connectors on the PCB and pry up the power & volume button flex cable.
Overturn the main board, disconnect the coaxial cable connector from the inside and remove the board.
Parts in the frame of the display module.