Open the back cover.
Lift and remove the battery.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 16 bolts in the frame of the phone.
Pry and remove the middle frame.
Disconnect connector on the PCB and remove the main camera.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 bolts in the PCB.
Disconnect connectors on the PCB and pry up vibration motor & power & volume button flex cable.
Overturn PCB, disconnect the connector from the inside and remove it.
Parts in the frame of the display module.