Open the back cover.
Peel back the protective layer.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 19 bolts in the frame of the phone.
Pry and remove the middle frame.
Disconnect the battery connector.
We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.
Disconnect connectors on the PCB.
Remove the lower PCB.
Disconnect connector on the PCB and remove the fingerprint sensor.
Disconnect connector on the PCB and remove the main camera.
One connector locates on the inside.
Remove the PCB.
Parts are in the frame of the display module.