Open the back cover.
Lift and remove the battery.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 bolts in the frame of the phone.
Pry and remove the middle frame.
Disconnect connectors on the lower PCB and remove it.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts in the PCB.
Disconnect connector on the PCB and remove the main camera.
Disconnect connectors on the PCB.
Turn over PCB, disconnect the connectors from the inside, remove the board and disconnect the coaxial cable .
Parts in the frame of the display module.