Open the back cover.
Lift and remove the battery.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 10 bolts in the frame of the phone.
Pry and remove the middle frame.
Remove the keys of the volume and power buttons.
Disconnect connector on the PCB and remove the front (selfie) cameras.
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts in the PCB.
Disconnect connectors on the PCB.
Turn over PCB & disconnect the connector from the inside and remove the board.
Parts in the frame of the display module.