Teardown difficulty:
Easy
Duration:
6 min

Recommended tools

Disassembly of the mobile device Acer Liquid Z500 with each step description and the required set of tools.


Specialist in content creation, distribution and content management.


How to disassemble Acer Liquid Z500, Step 1/1 How to disassemble Acer Liquid Z500, Step 1/2

Step 1. Open the back cover

Using a spudger or a plastic pick, carefully, around the edge, detach the back cover clips, and remove it.

Do not insert the tool deeply or bend it. Otherwise, the housing may be tampered with or damaged.

⚠️ Be careful when opening the cover from the volume and power buttons side. Thin cable and fragile buttons are straightforward to damage.


How to disassemble Acer Liquid Z500, Step 2/1 How to disassemble Acer Liquid Z500, Step 2/2

Step 2. Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 6 screws.


How to disassemble Acer Liquid Z500, Step 3/1 How to disassemble Acer Liquid Z500, Step 3/2 How to disassemble Acer Liquid Z500, Step 3/3

Step 3. Remove the battery

Disconnect the connector and remove the battery. Be careful, the battery may be glued from the inside.

Also, use a non-metal or plastic tool because the motherboard is powered.

ℹ️️️️ The Acer Liquid Z500 model has a battery BAT-A10 (1|CP4/58/71) with 2000 mAh capacity (aka rechargeable battery).


How to disassemble Acer Liquid Z500, Step 4/1 How to disassemble Acer Liquid Z500, Step 4/2

Step 4. Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 screws securing the motherboard.


How to disassemble Acer Liquid Z500, Step 5/1 How to disassemble Acer Liquid Z500, Step 5/2

Step 5. Remove the rear camera

Disconnect the connector and remove the main (rear) camera.


How to disassemble Acer Liquid Z500, Step 6/1 How to disassemble Acer Liquid Z500, Step 6/2 How to disassemble Acer Liquid Z500, Step 6/3

Step 6. Disconnect the connectors

Pry up the connectors for the display cable, sensors cable.

Besides, need to release side buttons power and volume +/-. Also, we have to release the loudspeaker, be careful, the loudspeaker is wired.

⚠️ Be careful when removing the cables from the connectors. The cables are pretty thin, and it is easy enough to break them or damage the contact tracks inside.


How to disassemble Acer Liquid Z500, Step 7/1 How to disassemble Acer Liquid Z500, Step 7/2

Step 7. Turn over the PCB

Carefully turn over the printed circuit board. Be careful, some parts may be glued and one cable still connected to the circuit board. Disconnect the display connector and remove the printed circuit board.


How to disassemble Acer Liquid Z500, Step 8/1 How to disassemble Acer Liquid Z500, Step 8/2 How to disassemble Acer Liquid Z500, Step 8/3

Step 8. In the display frame remained

ℹ️️ In the display frame remained: the earpiece speaker...

Detailed disassembly instructions of Acer Liquid Z500 in the video, made by our mobile repair & service center:

If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.


Disassembling\Repair has easy complexity and takes about 6 minutes in time. Our manual is suitable for all models Acer Liquid Z500 released for markets in different countries.



Back to the list
˄˅

Advertisement

˃˂

Advertisement