Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Alcatel One 5033D with each step description and the required set of tools.
8950
Views
2
Likes
—
Share
19
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Remove the battery
Remove the battery. The battery model of Alcatel One 5033D is TLi019D7.
Step 3.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 9 screws in the frame of the phone.
Step 4.
Unscrew one screw
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 short screw.
Step 5.
Open the mid-frame
Pry and remove the middle frame.
Step 6.
Disconnect the connectors
Disconnect connectors on the PCB.
Step 7.
Remove the rear camera
Disconnect the connector on PCB, and remove the main camera.
Step 8.
Remove the vibration motor
Lift the vibration motor up.
Step 9.
Remove the motherboard
Remove the PCB.
Step 10.
Remove the front camera
Disconnect the connector on PCB, and remove the front (selfie) camera.
Step 11.
Remove the earpiece speaker
Pry and remove the earpiece (speaker).
Step 12.
In the display frame remained
Parts are in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
8950
Views
2
Likes
—
Share
19
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Alcatel instructions most liked by readers
New instructions
Check our
New Alcatel brand instructions on vrm24.com
