Disassembly/Repair of the mobile device Alcatel OT A7 5090Y (Alcatel OneTouch A7) with each step description and the required set of tools.

4265

Views

—

Share

8

Questions

Vadim Popoff

Content manager / Author / Content specialist

Content specialist with over 10 years of experience in the technology industry.

Step 1.

Open the back cover
Open the back cover.

Step 2.

Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 9 short screws.

Step 3.

Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 6 long screws.

Step 4.

Open the mid-frame
Open the middle cover.

Step 5.

Remove the battery

Disconnect the connector on PCB and remove the battery. The battery model of Alcatel OneTouch A7 is Tlp038B1.


Step 6.

Remove the fingerprint sensor
Pry up the connector and remove the fingerprint sensor.

Step 7.

Remove the rear camera
Disconnect the connector on PCB, and remove the main camera.

Step 8.

Disconnect the connectors
Disconnect connectors on the PCB.

Step 9.

Remove the motherboard
Remove the PCB.

Step 10.

Remove the front camera
Disconnect the connector on PCB, and remove the front (selfie) camera.

Step 11.

In the display frame remained
Parts are in the frame of the display module.

Evgenii Kuzmin

Evgenii Kuzmin

Senior maintenance service and repair engineer

Disassembling\Repair has easy complexity and takes about 9 minutes in time. Our manual is suitable for all models Alcatel OT A7 5090Y or Alcatel OneTouch A7 released for markets in different countries.
Detailed disassembly instructions of Alcatel OT A7 5090Y in the video, made by our mobile repair & service center:

If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.

logo

4265

Views

—

Share

8

Questions