Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Eject tool
Disassembly/Repair of the mobile device Alcatel OT Idol 3 6045K (Alcatel OneTouch Idol 3) with each step description and the required set of tools.
5072
Views
0
Likes
—
Share
84
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Remove the battery
Disconnect the connector and remove the battery.
Step 3.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 5 bolts in the lower part.
Step 4.
Remove the loudspeaker
Pry and remove the lower part with buzzer (speaker).
Step 5.
Remove the interconnect cables
Unstick the inter-board cable and remove the coaxial cable.
Step 6.
Remove the sub-board
Pry and remove the lower PCB where located a vibrator and a charging connector.
Step 7.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts in the upper part.
Step 8.
Remove the cameras
Pry and remove the upper part and the main camera.
Step 9.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 bolts in the PCB.
Step 10.
Disconnect the connectors
Disconnect the connectors.
Step 11.
Remove the motherboard
Overturn the main board, disconnect the connector and remove the PCB.
Step 12.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
5072
Views
0
Likes
—
Share
84
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Alcatel instructions most liked by readers
New instructions
Check our
New Alcatel brand instructions on vrm24.com
