Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Alcatel OT PIXI 4 5010D (Alcatel OneTouch Pixi 4) with each step description and the required set of tools.
6417
Views
2
Likes
—
Share
4
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Remove the battery
Lift and remove the battery.
Step 3.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 12 bolts in the frame of the phone.
Step 4.
Remove the frame
Pry and remove the middle frame and the volume and power buttons.
Step 5.
Remove the loudspeaker
Pry and remove the speaker (buzzer).
Step 6.
Unscrew one screw
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 bolt in the PCB.
Step 7.
Remove the vibration motor
Disconnect the connectors on the PCB, pry & remove the vibrator and an FFC (flexible flat cable) of volume and power buttons.
Step 8.
Remove the motherboard
Overturn the board, disconnect the connector of the coaxial cable from the inside and remove the board.
Step 9.
Remove the microphone
Pry & remove the lower part with mic.
Step 10.
Remove the earpiece speaker
Pry & remove the ear speaker.
Step 11.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
6417
Views
2
Likes
—
Share
4
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Alcatel instructions most liked by readers
New instructions
Check our
New Alcatel brand instructions on vrm24.com
