Alcatel OT PIXI 8 9005X

Teardown difficulty:
Easy

Duration:
4 min

Recommended tools

Screwdriver phillips #000

Opening tool / spudger

Tweezers

Disassembly/Repair of the mobile device Alcatel OT PIXI 8 9005X (Alcatel OneTouch Pixi 8) with each step description and the required set of tools.

Vadim Popoff

Quality assurance specialist

Author, currently - Quality Assurance Specialist

How to disassemble Alcatel OT PIXI 8 9005X, Step 1/1

How to disassemble Alcatel OT PIXI 8 9005X, Step 1/2

Step 1. Open the back cover

Using a spudger or a plastic pick, carefully, around the edge, detach the back cover clips, and remove it.

Do not insert the tool deeply or bend it. Otherwise, the housing may be tampered with or damaged.

⚠️ Be careful when opening the cover from the volume and power buttons side. Thin cable and fragile buttons are straightforward to damage.

How to disassemble Alcatel OT PIXI 8 9005X, Step 2/1

How to disassemble Alcatel OT PIXI 8 9005X, Step 2/2

How to disassemble Alcatel OT PIXI 8 9005X, Step 2/3

Step 2. Remove the battery

Disconnect the connector on the motherboard and remove the battery.

ℹ️️ The Alcatel OT PIXI 8 9005X model has a battery TLp032CC with 3240 mAh capacity (aka rechargeable battery).

How to disassemble Alcatel OT PIXI 8 9005X, Step 3/1

How to disassemble Alcatel OT PIXI 8 9005X, Step 3/2

Step 3. Unscrew the screws

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 9 screws securing the motherboard.

How to disassemble Alcatel OT PIXI 8 9005X, Step 4/1

How to disassemble Alcatel OT PIXI 8 9005X, Step 4/2

How to disassemble Alcatel OT PIXI 8 9005X, Step 4/3

Step 4. Disconnect the connectors

Pry up the connectors of the display module cable, front (selfie) camera.

How to disassemble Alcatel OT PIXI 8 9005X, Step 5/1

How to disassemble Alcatel OT PIXI 8 9005X, Step 5/2

Step 5. Remove the motherboard

Carefully remove the printed circuit board. There is no need to use a lever or try to reach the board by force. Make sure that nothing is getting in the way or holding the board.

⚠️ Do not bend the circuit board when removing it or push tools under it. Unbeknownst to yourself, you can damage components or cables from the inside.

How to disassemble Alcatel OT PIXI 8 9005X, Step 6/1

How to disassemble Alcatel OT PIXI 8 9005X, Step 6/2

How to disassemble Alcatel OT PIXI 8 9005X, Step 6/3

Step 6. In the display frame remained

ℹ️️ In the display frame remained:

Detailed disassembly instructions of Alcatel OT PIXI 8 9005X in the video, made by our mobile repair & service center:

If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.

#instructions #Alcatel #Alcatel OT PIXI 8 9005X

Evgenii Kuzmin

Senior maintenance service and repair engineer

Disassembling\Repair has easy complexity and takes about 4 minutes in time. Our manual is suitable for all models Alcatel OT PIXI 8 9005X released for markets in different countries.

Back to the list