Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Alcatel OT POP C9 7047D (Alcatel OneTouch Pop C9) with each step description and the required set of tools.
4738
Views
1
Likes
—
Share
28
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew the 2 bolts securing the protection bar of the connector of the battery and coaxial cable.
Step 3.
Remove the battery
Disconnect connector on the PCB and remove the battery.
Step 4.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 bolts in the lower part.
Step 5.
Disconnect the connectors
Pry & remove the bottom part. Disconnect connectors and remove the coaxial cable.
Step 6.
Remove the bracket
Using a screwdriver (Phillips 1.5 mm PH000), unscrew the 7 bolts on the PCB and remove the bar holder that secures a connector and headset connector.
Step 7.
Remove the rear camera
Disconnect connector on the PCB and remove the main camera.
Step 8.
Remove the vibration motor
Disconnect the connectors on the PCB and remove the vibrator and an FFC (flexible flat cable) of volume and power buttons.
Step 9.
Remove the motherboard
Remove the PCB.
Step 10.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
4738
Views
1
Likes
—
Share
28
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Alcatel instructions most liked by readers
New instructions
Check our
New Alcatel brand instructions on vrm24.com
