Recommended tools
Screwdriver Phillips #000
Opening tool / Spudger
Tweezers
Disassembly/Repair of the mobile device Alcatel OT Star 6010X (Alcatel OneTouch Star) with each step description and the required set of tools.
3356
Views
1
Likes
—
Share
1
Questions
Step 1.
Open the back cover
Open the back cover.
Step 2.
Remove the battery
Lift and remove the battery.
Step 3.
Unscrew the screws
Using a screwdriver (Phillips 1.5 mm PH000), unscrew 8 bolts in the frame of the phone.
Step 4.
Open the mid-frame
Pry and remove the middle frame.
Step 5.
Disconnect the connectors
Disconnect connectors on the lower PCB.
Step 6.
Remove the sub-board
Overturn the lower board, disconnect the connectors from the inside, disconnect the connector of the coaxial cable and remove the board.
Step 7.
Remove the bracket
Remove the retaining bar.
Step 8.
Remove the rear camera
Unstick the flexible flat cable with the main camera.
Step 9.
Remove the motherboard
Disconnect the coaxial cable connector on the upper board and remove the PCB.
âš Warning!
The PCB separates along with the inter-board cable, so you need to remove it carefully.
Step 10.
In the display frame remained
Parts in the frame of the display module.
If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.
3356
Views
1
Likes
—
Share
1
Questions
Related Instructions
Related Reviews
Related Blog
Top instructions
Check our
Top Alcatel instructions most liked by readers
New instructions
Check our
New Alcatel brand instructions on vrm24.com
