Disassembly/Repair of the mobile device Apple iPhone 6 Plus (iPhone 6 Plus A1549, A1549, A1586) with each step description and the required set of tools.

Using the key tool, open the SIM card slot and remove it.

⚠ Warning!

Do not push too hard this may cause damage.

Using a screwdriver (Star Shape 0.8mm Pentalobe), unscrew the 2 bolts on the end of the phone.

Lift the display. Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket holds the connectors.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 5 bolts and remove the bracket holds the connectors.

Disconnect connectors and remove display.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket holds the connectors.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts, disconnect the coaxial cable connector and remove the Wi Fi antenna.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the holder of the main camera.

Disconnect connector on the PCB and remove the main camera.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts in the PCB.

Disconnect connectors on the PCB.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket holds the connectors.

Overturn the board.

Disconnect the connector from the inside and remove the board.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 3 bolts in the lower part.

Pry and remove the lower part with speaker (buzzer).

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 10 bolts at the bottom and remove the brackets.

Remove the flexible flat cable with lightning\charging port.

Parts in the back cover (housing).